IDT1230U Wand Decoded, USB Version ( IDT-1230U)

Home > Barcode Scanners >

IDT1230U Wand Decoded, USB Version ( IDT-1230U) Wand/Pen Barcode Reader

IDT1230U Wand Decoded, USB Version ( IDT-1230U)

List Price: $229.00
Our Price: $92.81
You Save $136.19!

Product Code: IDT1230U

Additional accessories

Optional desk top holer/stand [Add $15.00]

Description

Technical Specs

Extended Information

IDT1230U Wand Decoded, USB Version ( IDT-1230U) Series 1200 Wands from KANECAL are high-performance bar code scanners for use in applications requiring economical solutions. They are housed in rugged stainless steel barrel cases designed to provide a comfortable feel and to facilitate the handscanning motion.

Damage to bar code symbols from repeated scans is minimized by a smooth, extremely hard sapphire tip that is highly resistant to wear. This is important, as the typical bar codes symbol contains carbon as the black coloring agent, which is very abrasive.

Series 1200 wands use patented circuitry to enhance reading performance, enabling them to aggressively read narrow width bars and still reject the small bits of trash that accumulate on the symbol surface with time and use.

� Sapphire Tip
The smooth sapphire tip reduces the friction between the wand and the media, resulting in less damage to the surface of the bar code after repeated scans. It retains its optical qualities after repeated scannings.

� Stainless Steel Case
The case is constructed of polished stainless steel, suitable for heavy duty industrial usage. The cable is attached with a molded strain relief designed to both protect the cable and minimize interference with the scanning motion.

� Replaceable Tip
While the sapphire tip is extremely hard and is essentially abuse-resistant, it can be damaged if it is dropped onto a hard surface, such as a concrete floor. The tip is easily removed and replaced in the field if it should become damaged. This eliminates the need to replace the entire unit.

TM Specifications

Scanning
Light Source Red LED, 660 manometers
Scan Rate 3 to 40 ips (7 to 100 cm/s)
Resolution .0005 inches (.125 mm.)
Depth of Field 0 to .004 inches (0 to .1 mm.)

Physical
Diameter .53 inches (13.5 mm.)
Case Stainless steel
Tip Replaceable sapphire

Electrical
Connector DB-9S �squeeze to release�
DIN-5 and RS-45 optional
Cable 6 ft., coiled, attached
Signal Black = high
White = low
Power +5V DC @ 35 ma. max.

Environment
Temperature Operating: 32� to 122� F
(0� to 45� C)
Storage: -4� to 158� F
(-20� to 67� C)
Humidity 1% to 90% RH
Non-condensing
Ambient Light 400 Lux max. with PCS > .5