 |
 |
 |
|
SNC-DF70N Rugged Network Indoor Minidome color Video camera (SNY-SNCDF70N)
SNCDF70N Rugged Minidome Network Camera Sony is pleased to announce the expansion of its Network Video Camera lineup with the introduction of the SNC-DF70N, a day/night, IP-66 rated minidome network camera in an aluminum diecast rugged housing with high impact resistant polycarbonate clear dome, with both AC24V and Power Over Ethernet capability. The SNC-DF70N is a day/night, IP-66 rated minidome network camera in an aluminum diecast rugged housing with high impact resistant polycarbonate clear dome. This camera has both AC24V and Power Over Ethernet capability.
* Includes 2.7 x vari-focal, IR compensated, CS mount lens
* IP-66 rated, vandal proof housing enclosure
* Analog video output - 480 TV lines
* Bi-directional audio transmission, with external microphone input
* Motion detection using motion vector
* Equipped with one sensor in, two relay outputs, external trigger input for day/night, as well as external output for night mode (b/w)
* Back light compensation, ATW and AGC
* Up to 10 users (MPEG-4 mode); 20 users (JPEG mode)
* 100Base-TX/10BASE-T Ethernet interface
* Supports TCP/IP, UDP, RTP, RTCP, ARP, ICMP, DHCP, DNS, HTTP, FTP, SMTP, NTP and SNMP (MIB2) |
|
|
|
|
|
 |
|
 |
|
Features
Motion Detection/Alarm Trigger SNC-DF70N Rugged Network Indoor Minidome color Video camera (SNY-SNCDF70N)
The SNC-DF40P is equipped with a built-in motion detection function that can generate an alarm through its alarm-output port or trigger another device to perform a variety of actions. The motion detection function uses vector information to detect motion so that unwanted noise components do not accidentally trigger the alarm. In addition, the SNC-DF Series is equipped with a sensor-input port that can receive a trigger from an external sensor.
Pre-/Post-Alarm Image Storage
With a built-in buffer memory, the SNC-DF Series can store several seconds of pre-alarm and post-alarm still images when the motion detection function, the alarm input or both trigger an alarm.
Image Transfer Using FTP/SMTP
All of the pre-/post-alarm images stored at the time of an alarm event can be transferred to an FTP server for later viewing. In addition, the still image captured at the time of an alarm event can be sent to a designated e-mail address.
Analogue Composite Video Output
The SNC-DF Series is equipped with an analogue composite video output, allowing camera images to be directly recorded or monitored by connecting video equipment such as time-lapse recorders, hard disk recorders, and monitors.
Single Cable operation for easy installation
The SNC-DF40P offers a choice of three different power supplies. AC 24 V or DC 12 V can be supplied through the standard power terminal while Power-over-Ethernet simplifies installation by reducing the need for additional cables for power.
|
|
|
 |
|
 |
|
|
|
